manualshive.com logo in svg

Gateway e-4000, User Manual


Share
Download
background image

243

www.gateway.com

Notices

Copyright © 2003 Gateway, Inc.
All Rights Reserved
14303 Gateway Place
Poway, CA 92064 USA

All Rights Reserved

This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or 
transmitted by any means or in any form, without prior consent in writing from Gateway.

The information in this manual has been carefully checked and is believed to be accurate. However, changes are 
made periodically. These changes are incorporated in newer publication editions. Gateway may improve and/or 
change products described in this publication at any time. Due to continuing system improvements, Gateway is 
not responsible for inaccurate information which may appear in this manual. For the latest product updates, 
consult the Gateway Web site at 

www.gateway.com

. In no event will Gateway be liable for direct, indirect, special, 

exemplary, incidental, or consequential damages resulting from any defect or omission in this manual, even if 
advised of the possibility of such damages.

In the interest of continued product development, Gateway reserves the right to make improvements in this 
manual and the products it describes at any time, without notices or obligation.

Trademark Acknowledgments

1-800-GATEWAY, ActiveCPR, ALR, AnyKey, black-and-white spot design, CrystalScan, Destination, DestiVu, EZ 
Pad, EZ Point, Field Mouse, Gateway 2000, Gateway Country, gateway.net, Gateway stylized logo, Perfect 
Scholar, Solo, TelePath, Vivitron, stylized “G” design, and “You’ve got a friend in the business” slogan are 
registered trademarks and black-and-white spotted box logo, GATEWAY, Gateway Astro, Gateway@Work, 
Gateway Connected touch pad, Gateway Connected music player, Gateway Cyber:)Ware, Gateway 
Education:)Ware, Gateway Flex Case, Gateway Gaming:)Ware, Gateway GoBack, Gateway Gold, Gateway 
Learning:)Ware, Gateway Magazine, Gateway Micro Server, Gateway Money:)Ware, Gateway Music:)Ware, 
Gateway Networking Solutions, Gateway Online Network (O.N.) solution, Gateway Photo:)Ware, Gateway 
Professional PCs, Gateway Profile, Gateway Solo, green stylized GATEWAY, green stylized Gateway logo, 
Gateway Teacher:)Ware, Gateway Video:)Ware, HelpSpot, InforManager, Just click it!, Learn@Gateway, Kids 
BackPack, SERVE-TO-ORDER, Server Watchdog, SpotShop, Spotshop.com, and Your:)Ware are trademarks of 
Gateway, Inc. Intel, Intel Inside logo, and Pentium are registered trademarks and MMX is a trademark of Intel 
Corporation. Microsoft, MS, MS-DOS, and Windows are trademarks or registered trademarks of Microsoft 
Corporation. All other product names mentioned herein are used for identification purposes only, and may be the 
trademarks or registered trademarks of their respective companies.

Macrovision statement

If your computer has a DVD drive and an analog TV Out port, the following paragraph applies:

This product incorporates copyright protection technology that is protected by method claims of certain U.S. 
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of 
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home 
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse 
engineering or disassembly is prohibited.

Summary of Contents for e-4000





































































































































































































































































Reviews:

No comments

Related manuals for e-4000

IBM Personal Computer Referencia Rápida preview
Personal Computer
Brand: IBM Pages: 64
Mercury SmartCraft SC5000 Operation Manual preview
SmartCraft SC5000
Brand: Mercury Pages: 64
Medion Akoya E4055 D Instruction Manual preview
Akoya E4055 D
Brand: Medion Pages: 88
Quanmax QDSP-0200 Series User Manual preview
QDSP-0200 Series
Brand: Quanmax Pages: 39
Aaeon BOXER-6403 Manual preview
BOXER-6403
Brand: Aaeon Pages: 88
Omnitronic DMS-1050 Operating Instructions Manual preview
DMS-1050
Brand: Omnitronic Pages: 56
Gateway 300X User Manual preview
300X
Brand: Gateway Pages: 118
HP Z2 SFF G5 Product End-Of-Life Disassembly Instructions preview
Z2 SFF G5
Brand: HP Pages: 10
HP Z2 Tower G5 Product End-Of-Life Disassembly Instructions preview
Z2 Tower G5
Brand: HP Pages: 12
HP Z240 Small Form Factor User Manual preview
Z240 Small Form Factor
Brand: HP Pages: 60
HP TouchSmart IQ830 Quick Setup Manual preview
TouchSmart IQ830
Brand: HP Pages: 1
HP TouchSmart 320-1000 Quick Setup Manual preview
TouchSmart 320-1000
Brand: HP Pages: 1
HP Z238 Maintenance And Service Manual preview
Z238
Brand: HP Pages: 91
HP TouchSmart 310-1000 - Desktop PC Quick Start Manual preview
TouchSmart 310-1000 - Desktop PC
Brand: HP Pages: 1
HP TouchSmart 310-1125 Specifications preview
TouchSmart 310-1125
Brand: HP Pages: 2
HP TouchSmart 320-1030 Specifications preview
TouchSmart 320-1030
Brand: HP Pages: 2
HP TouchSmart 9300 Elite Quickspecs preview
TouchSmart 9300 Elite
Brand: HP Pages: 13
HP TouchSmart IQ840 - Desktop PC Upgrade And Maintenance Manual preview
TouchSmart IQ840 - Desktop PC
Brand: HP Pages: 28

Brands by name

Popular brands

Load more brands