Gateway e-4000 User Manual Download

Page: 44 / 260

Chapter 3: Getting Help

www.gateway.com

Searching for a topic

To search for a topic in HelpSpot, type a word or phrase (keyword) in the

Search

box located at the top of any HelpSpot screen, then click the arrow

button.

For each search, you receive the following search result types:

■

Suggested Topics - These topics are located in HelpSpot and are relevant
to your search topic.

■

Full-text Search Matches - These topics are located in HelpSpot and contain
the words you entered in the

Search

box.

■

Microsoft Knowledge Base - These topics are located on the Microsoft Web
site and contain the words you entered in the

Search

box. You must be

connected to the Internet to search for and access these topics.

■

Gateway.com Search - These topics are located on the Gateway Web site
and contain the words you entered in the

Search

box. You must be

connected to the Internet to search for and access these topics.

To view a list of your search results, click the results header for the type of results
you want to view.

To view a topic, click the topic name in the

Search Results

list.

Search box

Search results

header

Search results

headers

Summary of Contents for e-4000





































































































































































































































































Search results

Summary of Contents for e-4000

Reviews:

Related manuals for e-4000

Brands by name

Popular brands

Gateway e-4000, User Manual

Search results

Summary of Contents for e-4000

Reviews:

Related manuals for e-4000

Brands by name

Popular brands