Gateway e-4000 User Manual Download Page 112

Page: 112 / 260

106

Chapter 7: Adding or Replacing Components

www.gateway.com

Identifying your computer case
style

Use the following descriptions to identify the style of your computer case.

Gateway Mid Tower

Gateway Micro Tower

Gateway 4-bay Small Form Factor

The Gateway Mid Tower
case has an access door
on the front that covers
the drive bays and other
components.

For information on the
Gateway Mid Tower case,
see

“Gateway Mid Tower

Case” on page 107

The Gateway Micro Tower
has a removable base and a
silver bezel.

For information on the
Gateway Micro Tower case,
see

“Gateway Micro Tower

Case” on page 130

The Gateway 4-bay Small Form
Factor case has a removable stand
and a black bezel.

For information on the Gateway
4-bay Small Form Factor case, see

“Gateway 4-bay Small Form Factor
case” on page 158

Summary of Contents for e-4000





































































































































































































































































Search results

Summary of Contents for e-4000

Reviews:

Related manuals for e-4000

Brands by name

Popular brands

Gateway e-4000, User Manual

Search results

Summary of Contents for e-4000

Reviews:

Related manuals for e-4000

Brands by name

Popular brands