Gateway e-4000, User Manual

Page: 185 / 260

179
Gateway 4-bay Small Form Factor case
www.gateway.com
6
Install the new card into the add-in slot.
You can slightly seesaw the card end-to-end to help insert the card, but
do not bend the card sideways.
7
Push the add-in card retention cover inward. If you removed a screw,
replace it.
8
If you disconnected any cables, reconnect the add-in card cables using your
notes from Step 3. See the add-in card documentation for further
instructions.
9
Close the case by following the instructions in “Closing the case” on
page 161 .
10
See the documentation that came with the card for any special software
installation instructions.
Replacing the power supply
To replace a power supply:
1
Identify your computer case style. For more information, see “Identifying
your computer case style” on page 106 .
2
Open the case by following the instructions in “Opening the case” on
page 158 .
3
Disconnect the power supply cables from all components (such as, hard
drives, CD/DVD/Recordable drives, and the system board), noting their
locations and orientation. (You will reconnect the cables after you install
the new power supply.)