Garmin APOLLO GX SERIES, Service Manual

Page: 163 / 166

GX Service Data Sheet (Manual P/N 560-7001-5XX)
Page 1 of 2
P/N: 561-6001-50
11/4/04
NOTE:
GX Service Data Sheet procedures provide step by step
instruction for filling out this form.
PRELIMINARY INSPECTION
Technician Date
RMA#____________________ Serial #
P/N_________________ Model
Mod
VISUAL DAMAGE
Visual Damage Initials: _____________Date: ___________________
____None ___Hardware Damage ____Other
Visual Damage Details: _____________________________________
________________________________________________________
________________________________________________________
HIDDEN DAMAGE
Hidden Damage Initials_____________Date____________________
____No Damage Found ___Minor Damage ____Major Damage
Hidden Damage Details: ___________________________________
_______________________________________________________
_______________________________________________________
NORMAL MODE NAV INFO
Last Valid Pos: ____________________/___________________
CDI Scaling ____Automatic ____Manual
Direct-To Entry ____Never Clears ____May Clear
Date & UTC ____Correct Not Correct______________________
Software Version: NAV________ GPS_________ COMM________
Database Expiration Date ______ / ______ / ____________
Database Part Number 138-
NORMAL MODE COM INFO(GX60/65)
COM SW V2.X COM SW V1.X
Intercom SQLCH:______MIC1 Intercom SQLCH
_____MIC2 Intercom Level______________
Transmit using: _______MIC1 Sidetone Level _____________
and MIC2 Headphone Level ___________
_____MIC1 only
_____MIC2 only
Intercom Level: ___________________________
Sidetone Level: ___________________________
Headphone Level: _________________________
TEST MODE NAV INFO
Serial Ports: Channel RX TX
1: ___________ ____________
2: ___________ ____________
IFR APPROACH SAR
YES ________ ________ ________
NO ________ ________ ________
EEPROM BYTE Info
Address Description Data Value
0219 Equipment Run Time _______________
0224 Turn On Cycle Count _______________
0229 EEPROM Failures _______________
0230 NVRAM Failures _______________
0231 Minor Math Errors _______________
0232 Major Math Errors _______________
0233 Exception Interruption _______________
TEST MODE COMM Info (Comm V 2.X only)
RX Squelch Level ________________
MIC 1 Level ________________
MIC 2 Level ________________
FINAL ACCEPTANCE TEST
Technician: __________________ Date: ___________________
______Return to Service Procedures Completed (Chapter 11)
______RS232 Load Test per MET 154
______3D Pos, SNRs, Elev, & AZM Match Standard Unit
______Verify Lat/Long matches the standard unit.
______Verify Time and Date
______Verify Software Versions for:
Nav Application: ________ GPS _______ Display
______Emergency Search (nearest airport)
______Verify Board Rev Stickers
______Bump Test (Raise front of unit 3” and drop it. Observe
display for changes/blinking.)
______Check messages for return to service messages
FINAL INSPECTION
Inspector:________________________ Date: _______________
______Final Acceptance Test Checklist completed above
______Scan area of replaced components
______Backlighting (display and buttons)
______Unit and Board Configuration Correct (See Unit
Configurations)
______Verify UTC Time
______Covers, Rods and Screws Installed
______Verify customer setup with Service Data Sheet
______Replaced cover screws