Furuno FSV-24, Operator'S Manual

Page: 65 / 174

2. HORIZONTAL MODE
2-37
COLOR RESPONSE…: Adjusts reflected echo strength versus echo color level
for currently selected color response number.
To adjust the curve, place the trackball at the point desired and press the
[MENU] key. On the horizontal axis input level relative value is shown in the
range from 0 to 100%. The setting range for input level is 0-100% in increments
of 10% and output level is 0-100% in any value.
0 100 80 60 40 20
100
80
60
40
20
H-SCAN COLOR
DEFAULT CANCEL QUIT
To set input level versus output level, use the trackball to
place the trackball mark on location desired and press the
[MENU] key.
DEFAULT: Select to restore default
setting for selected color response.
CANCEL: Select to cancel change.
QUIT: Select to finish.
Currently selected color
Input level scale
Figure 2-48 Color response curve
GAIN OFFSET: Adjusts gain level. If the front panel [GAIN] control does not
provide satisfactory gain adjustment, enter an offset here. The default setting is
0 and the setting range is 0-12.
SIGNAL LEVEL: Dirty water or reflections from plankton may be painted on the
screen in green or light-blue. These echoes may be erased in order of strength.
Select the signal level to erase with the trackball and press the [MENU] key. The
setting range is 0-15 and the default setting is 0.
FAR TVG CURVE: Selects the TVG curve to use. TVG2 is the default TVG
curve.