manualshive.com logo in svg

Furuno FSV-24, Operator'S Manual

The Furuno FSV-24 is a state-of-the-art marine radar system used for accurate navigation and surveillance. Make the most of this advanced technology by downloading the Installation Manual, available for free at manualshive.com. This comprehensive manual will guide you through the product setup, ensuring a smooth and hassle-free installation process.

Share
Download
background image

2. HORIZONTAL MODE 

 

 

 

2-30

 (35)

Stored when 
EVENT key is 
pressed.

A

B

You observe picture from
direction of 

ò

 mark. 

 

Figure 2-39 Event mark description 

2.18.2 

Entering an own ship position mark 

Place the trackball mark close to the own ship mark and press the [EVENT] key. 
Ten own ship position marks may be inscribed. When the capacity for own ship 
position marks is reached the earliest own ship position mark is automatically 
erased.  
 

2.18.3 

Erasing an event mark, own ship position mark 

Event marks and own ship position marks can be deleted individually with the 
[DELETE MARK] key or by earliest entry through the menu. 
 

Deleting event marks, own ship position mark with the [DELETE MARK] 
key 

Use the trackball to place the trackball mark on the event mark or own ship 
position mark you want to erase. The color of the mark changes from white to 
red when the mark is correctly selected. Press the [DELETE MARK] key to 
delete the mark.   
 

Deleting event marks, own ship position mark through the menu 

1.  Press the [MENU] key to show the menu. 
2.  Select OTHERS and press the [MENU] key. 
3.  Select ERASE MARKS and press the [MENU] key. 

ERASE MARKS

 

MENU

QUIT

QUIT

OTHERS

EVENT MARK

: DELETE

FISH MARK

: DELETE

OWN SHIP POS MARK : DELETE

SHIP'S TRACK

: DELETE

QUIT

 

Figure 2-40 ERASE MARKS menu 

4. Select EVENT MARK (or OWN SHIP POS MARK) and press the [MENU] key. 

Each pressing deletes the earliest event mark (or own ship position mark). 

5.  Select QUIT at the top of the menu screen and press the [MENU] key to quit 

all menus.   

Summary of Contents for FSV-24















































































































































































Reviews:

No comments

Related manuals for FSV-24

Brands by name

Popular brands

Load more brands