manualshive.com logo in svg

Furuno FSV-24, Operator'S Manual

The Furuno FSV-24 is a state-of-the-art marine radar system used for accurate navigation and surveillance. Make the most of this advanced technology by downloading the Installation Manual, available for free at manualshive.com. This comprehensive manual will guide you through the product setup, ensuring a smooth and hassle-free installation process.

Share
Download
background image

INDEX 

 

Index-3

Own ship position marks 

entering...........................................2-30 
erasing............................................2-30 
size .................................................8-10 

P

 

Panel dimmer ...................................... 1-4 
Panel test ...........................................10-9 
Picture advance 

at shooting of net (ES1 mode) ........4-16 
normal.............................................4-11 

Picture recall ......................................2-34 
Picture shot ........................................2-33 
Pitch angle .........................................8-15 
POWER switch.................................... 1-2 
Presentation mode .............................2-21 
PRESET, MEMORY CARD menu ....... 8-5 
Pulselength 

horizontal mode ..............................2-11 
vertical mode ................................... 3-9 

R

 

R/B AUDIO key 

history mode .................................... 5-5 
horizontal mode ..............................2-20 

Range 

measuring in horizontal mode.......... 2-8 
measuring in vertical mode .............. 3-6 
presetting for horizontal range ......... 8-5 
presetting for vertical range ............. 8-5 
setting in echo sounder mode.......... 4-8 
setting in horizontal mode ................ 2-3 
setting in vertical mode .................... 3-6 

Range and bearing data .....................8-10 
RANGE control 

horizontal mode ............................... 2-3 
vertical mode ................................... 3-6 

Range rings 

description ....................................... 8-7 
interval ............................................8-10 

Reverberation............................. 2-21, 8-4 
Rolling angle ......................................8-15 
Rx test ..............................................10-11 

S

 

Scale (echo sounder) .........................4-16 
Sea surface reflections.......................2-41 
SHOOT key........................................2-32 
Sidelobe echoes.................................2-42 

Signal level 

ES1 mode ...................................... 4-15 
horizontal mode ............................. 2-37 
vertical mode.................................. 3-14 

Smoothing 

circular in horizontal mode ............. 2-38 
circular in vertical mode ................. 3-15 
range in horizontal mode................ 2-38 
range in vertical mode.................... 3-15 

STABILIZATION menu....................... 8-15 
Start-up test ......................................10-11 
Status messages ............................... 10-6 
System configuration ...............................x 

T

 

Target lock 

data to use ..................................... 8-15 
fish school mode ............................ 2-17 
interlock ......................................... 8-15 
position mode................................. 2-18 
speed update ................................. 8-15 
target speed limit............................ 8-15 
threshold ........................................ 8-15 
type ................................................ 2-16 
window size ................................... 8-15 

TARGET LOCK key .................. 2-17, 2-18 
Target lock mark .................................. 8-9 
TARGET LOCK menu........................ 8-14 
TEST menu ....................................... 10-7 
Test pattern...................................... 10-10 
Tests 

board test ....................................... 10-8 
noise test ......................................10-11 
panel test ....................................... 10-9 
Rx test...........................................10-11 
test menu ....................................... 10-7 
test pattern ................................... 10-10 

Tilt angle .............................................. 2-3 
TILT control.......................................... 2-3 
Tilt interlock ....................................... 8-14 
Time offset......................................... 8-17 
Track 

amount to display........................... 8-10 
description ....................................... 8-7 
erasing ............................................. 8-2 

Trackball mark position.......................8-11 

Summary of Contents for FSV-24















































































































































































Reviews:

No comments

Related manuals for FSV-24

Kongsberg Simrad SP90 Series Manual preview
Simrad SP90 Series
Brand: Kongsberg Pages: 44
Furuno CSH-5L Operator'S Manual preview
CSH-5L
Brand: Furuno Pages: 89
Lowrance HOOK2 7 Installation Manual preview
HOOK2 7
Brand: Lowrance Pages: 2
Raymarine CP370 Installation Instructions Manual preview
CP370
Brand: Raymarine Pages: 102

Brands by name

Popular brands

Load more brands