9-1
9. MEMORY
CARD
OPERATION
This chapter provides the information necessary for using the memory cards,
which provide for storage of pictures and configurations (settings).
9.1
Storing Image, Configuration
Two sample configuration files, which program settings including those for the
USER PROG control, are provided in the memory card supplied with the
accessories. (The program “2000/01/01 00:01” is for English.) Before loading the
sample configuration file from the memory card, store the configuration file to
back up the current settings.
The memory card can store a combination of 32 image and configuration files,
depending on card’s memory capacity and size of image file. Configuration files
store current settings, and they can be replayed to set up the equipment
according to fishing ground or target fish.
The date and time a file is stored is shown in the file list. If there is no time or
date input when a file is stored the file’s date and time line shows 0000/00 as the
date and 00:00-99:99 as the time.
Note:
Before storing image or configuration to a memory card, you should store
it into the internal memory. (See page 2-33.)
1. Remove the lid at the front of the processor unit.
2. Insert a memory card face right in the card slot in the processor unit.
Card
slot
Eject
button
Figure 9-1 Processor unit
3. Press the [MENU] key to open the menu.
4. Select OTHERS and press the [MENU] key.
5. Select PRESET, MEMORY CARD and press the [MENU] key.
Summary of Contents for FSV-24
