Fukuda VaSera VS-2000 Series, Operation Manual

Page: 204 / 234

12-2
Chapter 12 Maintenance and Inspection
* Cuffs, air hoses, PCG microphone, etc.
Operation
Periodic Inspection
Perform periodic inspections according to the Periodic Inspection Procedure described below.
• Perform the inspections described in the Periodic Inspection Procedure once a year.
• If the device fails any inspection on the periodic inspection list, the general assessment must be "failed". Fix all failed items.
• Use the device only when it has passed all the inspection items.
Periodic Inspection Procedure
●
Visual Inspection
Cables Power supply cable
LAN cable
BPU cable
Verify that there is no scratch or damage. No scratch or damage should be found.
Verify the connection status of the cables. Should be connected properly.
Item Inspection Item Procedure Criteria
Operation Power Supply Check the startup screen at power ON. The screen should be displayed at power
ON.
Display Check the screen. No abnormality or flickering should be
found.
Check for errors on the screen. No errors should be displayed on the screen.
Icon display
(At power on)
Check the status of the icons The device connection status should be
displayed correctly.
Keys and Buttons Press and check the keys and buttons. Operation should be smooth.
0mmHg check Check the pressure value displayed at
power on.
Should be within ±1 mmHg.
Clock Check the date/time displayed at the lower
right of the display.
The current date/time should be displayed
correctly.
Item Inspection Item Procedure Criteria
Main Unit 1) Enclosure Verify that there are no scratches, cracks,
deformation or rust
No scratch, crack, deformation and rust
2) Labels and panels Verify that labels and panels are not peeled
off or stained.
No peeling or stain should be found.
3) Keys Verify that the keys are not damaged No damage should be found.
Item Inspection Item Procedure Criteria