Fukuda VaSera VS-2000 Series Operation Manual Download Page 152

Page: 152 / 234

9-2

Chapter 9 File Transfers

Files and Folders

It is difficult to organize and manage data if a large number of data items (files) are recorded. Folders are therefore used to

organize files in a functional way by keeping multiple files together.

Folder1 is the first folder to be created. Data is saved to Folder1 until Folder1 becomes full. Data is then saved to Folder2. The

maximum number of folders depends on the capacity of the media.

• A folder is created when the SD card or USB memory is formatted.

• The folder to save the data can be changed. (Refer to "Changing the Folder to Save the Data" (P9-17).)

Inserting the SD Card

Insert the optional card in the SD card slot of this device.

Make sure to insert the SD card in a correct direction.

The SD card needs to be formatted before it can be used.

(Refer to "Initialization" (P9-4).)

Summary of Contents for VaSera VS-2000 Series











































































































































































































































Search results

Summary of Contents for VaSera VS-2000 Series

Reviews:

Related manuals for VaSera VS-2000 Series

Brands by name

Popular brands

Fukuda VaSera VS-2000 Series, Operation Manual

Search results

Summary of Contents for VaSera VS-2000 Series

Reviews:

Related manuals for VaSera VS-2000 Series

Brands by name

Popular brands