Fukuda VaSera VS-2000 Series, Operation Manual

Page: 202 / 234

11-26
Chapter 11 Settings of This Device
Saving and Initializing the Settings
The current settings can be saved to the SD card or printed as a report. The settings can also be initialized.
Saving Settings to an SD Card
1
Insert the SD card into the device.
2
Touch [Menu] on the touch panel.
3
Touch [Setting].
4
Touch [Save settings].
• The current settings are saved to the SD card.
• The settings saved to the SD card can be loaded later
using [Load settings]. This is useful in situations such
as when the same settings need to be configured on
multiple devices.
Network settings (device name, IP address, etc.) are
not saved.
Saving Codes to an SD Card
1
Insert the SD card into the device.
2
Touch [Menu] on the touch panel.
3
Touch [Setting].
4
Touch [1/2].
5
Touch [Save Code.].
• The codes registered for Dept. 1-4, Med., Symp., Dr.
Nm1-2 and Tech., along with the names and facility
name, are saved to a file called "TABLE.INI" in the
"ETC" folder on the SD card.
• The codes saved to the SD card can be loaded later
using [Read Code.]. This is useful in situations such as
when the same settings need to be configured on
multiple devices.
Initializing Common Settings
1
Touch [Menu] on the touch panel.
2
Touch [Setting].
3
Touch [Initialize Settings].
All of the common settings are initialized.
The settings for each examination are not initialized.
Initializing Each Setting
1
Touch [Menu] on the touch panel.
2
Touch [Setting].
3
Touch the applicable setting.
4
Touch [1/2].
5
Touch [Reset].
The applicable setting is initialized.