Fukuda VaSera VS-2000 Series, Operation Manual

Page: 62 / 234

2-12
Chapter 2 Installation
Turning the Power ON and OFF
To Turn ON the Power
Check that the AC power indicator is lit faintly in blue.
1
Press the [POWER] key on either the
display unit or the main unit.
Check that a beep sounds when the POWER key is
pressed.
If no sound is heard when the AC power is turned ON,
the power cable may not be connected properly.
Reconnect the power cable.
An initial display appears on the screen after the power is turned ON, followed by the home display.
A crackling sound is heard after the
power is turned ON. This is the operation
sound of the valve. It occurs during the
preparation operations of the device and
is not a malfunction.
The device may take longer to start up
after the power is turned ON when the
temperature in the room (or other area
where the device is being used) is below
10°C. This is not a malfunction. Use the
device in temperatures within the
specified range (10-40°C).
Display Unit
Main Unit
Initial Display Home Display
The examination set in "Exam. on Startup" is displayed.