Fukuda VaSera VS-2000 Series, Operation Manual

Page: 203 / 234

12-1
Chapter
12
Maintenance and Inspection
To ensure the long-term safety of the device, the device needs to be inspected and accessories need to be replaced periodically.
Daily Inspection
Perform daily inspections according to the Daily Inspection Procedure described below.
• If the device fails any inspection on the daily inspection list, the overall judgment will be "Fail". Take actions for all failed
items.
• Use the device only when it has passed all the inspection items.
Daily Inspection Procedure
●
Visual Inspection
●
Accessories, Cables
This chapter describes the maintenance and inspection procedures for this device.
Make sure to perform daily inspections and periodic inspections to maintain functionality, performance and reliability.
Fukuda Denshi shall not be liable for accidents arising from failure to perform maintenance and inspections.
• Never disassemble or modify the device.
It may result in fire hazard or electric shock.
• Do not perform the Maintenance menu procedure which is not described in this manual.
It may result in malfunction.
Item Inspection Item Procedure Criteria
Main Unit 1) Enclosure Verify that there are no scratches, cracks,
deformation or rust
No scratch, crack, deformation and rust
should be found.
2) Labels and panels Verify that labels and panels are not peeled
off or stained.
No peeling or stain should be found.
3) Keys Verify that the keys are not damaged No damage should be found.
Item Inspection Item Procedure Criteria
Accessories Sensors (*) Verify that there is no scratch or damage. No scratch or damage should be found.
Verify the connection status of the cables
and hoses.
Should be connected properly.
Operation manual Verify that the operation manual is kept in
specified location.
Should be kept in specified location.
WARNING
CAUTION