![Fukuda VaSera VS-2000 Series Operation Manual Download Page 213](http://html.mh-extra.com/html/fukuda/vasera-vs-2000-series/vasera-vs-2000-series_operation-manual_2344837213.webp)
12-11
Chapter 12 Maintenance and Inspection
When error messages are displayed
The following two types of system error messages are displayed when an unexpected failure occurs in the system.
Take appropriate action by following the message.
●
If continuous operation is possible
Processing was
suspended
due to a failure occurring in the system. The suspended process can be continued by
performing the previous operation again.
●
If continuous operation is not possible
Processing was
aborted
due to a failure occurring in the system. An error in the device settings or a failure in the built-in
software may have occurred. Press and hold the POWER button for 10 seconds to turn OFF the power and then contact
your local Fukuda Denshi service representative.
●
If the BPU-100* Pulse Wave Unit is defective
The BPU-100 Pulse Wave Unit may be defective. Contact your nearest service representative.
*
BPU1:
Indicates the BPU-100 inserted in the upper slot of the VS-2000.
BPU2: Indicates the BPU-100 inserted in the lower slot of the VS-2000.
BPU3: Indicates the BPU-100 connected to the IB connector of the VS-2000.
Summary of Contents for VaSera VS-2000 Series
