Fukuda VaSera VS-2000 Series Operation Manual Download Page 229

Page: 229 / 234

13-15

Chapter 13 Appendix

Inspection List

Daily Inspection List

●

Copy this sheet for use.

Conduct inspections according to the Daily Inspection Procedure.

Management No.

Item

Inspection Item

Procedure and Criteria

Judgment

Remarks
(Repair
Needed)

Visual
Inspection
(Visual
check)

Main Unit

Enclosure

No scratch, crack, deformation and rust

Pass / Fail

Labels and panels

No peeling or staining

Pass / Fail

Keys and Buttons

No damage

Pass / Fail

BPU-100
(For toes)

Enclosure

No scratch, crack, deformation and rust

Pass / Fail

Label and panel

No peeling or staining

Pass / Fail

Accessories,
Cables

Accessories

Cuffs, Sensors

No scratch or damage

Pass / Fail

Cables and hoses are connected properly.

Pass / Fail

Operation manual

Kept in a specified location

Pass / Fail

Cables

Power supply cable
Connector cables

No scratch or damage

Pass / Fail

Cables and hoses are connected properly.

Pass / Fail

Operation Operation

Power

Display turns ON at power ON.

Pass / Fail

Display

No abnormality or flickering.

Pass / Fail

Verify that no errors are displayed on the
screen.

Pass / Fail

Icon display
(At power on)

Verify that the status of the connected de-
vice is displayed correctly.

Pass / Fail

Keys and Buttons

Smooth operation.

Pass / Fail

0mmHg check

Verify that the pressure value displayed at
power on is within ±1 mmHg.

Pass / Fail

BPU-100 (For toes)

Verify that there are no abnormalities in the
display.

Pass / Fail

Clock

Verify that the present date/time is displayed
in the Clock Setting window and is correct.

Pass / Fail

Overall judgment

Pass / Fail

Model Name

VaSera VS-2000 Series

Model

Serial number

Location

Date of
Purchase

Date of Inspection

Checked by

Approval

Summary of Contents for VaSera VS-2000 Series











































































































































































































































Search results

Summary of Contents for VaSera VS-2000 Series

Reviews:

Brands by name

Popular brands

Fukuda VaSera VS-2000 Series, Operation Manual

Search results

Summary of Contents for VaSera VS-2000 Series

Reviews:

Brands by name

Popular brands