Fujitsu ScanSnap iX100, Basic Operation Manual

Page: 453 / 514

Cleaning SV600
This section explains how to clean the outside of the ScanSnap.
If the white sheet, glass, camera, lamp, or infrared LED is dirty, errors may appear in the scanned
images. Whenever an error appears in a scanned image, clean the ScanSnap.
1.
Unplug the cables from the ScanSnap.
2.
Clean the outside of the ScanSnap with a dry cloth, or a cloth moistened with
Cleaner F1/mild detergent.
Use a cotton swab to clean small parts such as the camera or infrared LED of the ScanSnap.
ATTENTION
l Never use paint thinner or any other organic solvents. The shape or color may be changed.
l When cleaning the ScanSnap, prevent liquids from entering the ScanSnap.
l It may take a long time for Cleaner F1 to dry if an excessive amount is used. Moisten the
cloth with moderate quantity. Wipe off the cleaner completely with a soft cloth to leave no
residue on the cleaned parts.
l When cleaning the ScanSnap, hold the neck of the ScanSnap with your hand to prevent it
from falling over.
Cleaner F1 or
a Mild Detergent Cloth
Lamps
Glass
White Sheets
Camera
Infrared LED
Cleaning SV600
453