BX900 S2
Upgrade and Maintenance Manual
155
Local Service Display
Figure 54: Fastening the Local Service Display stop
Ê
Fasten the Local Service Display Secure stop using the screw that you kept
when you removed the defective one.
10.1.5 Concluding steps
Perform the following procedures to complete the task:
Ê
Reconnect the AC power cord to the PSUs and secure it with a cable tie as
described in section
"Connecting the system unit to the mains" on page 50
.
Ê
If applicable, close the rack door as described in section
"Closing the rack
door" on page 60
.
Ê
Switch on the system unit as described in section
"Switching on the system
unit" on page 52
.
/