BX900 S2
Upgrade and Maintenance Manual
63
5
Basic software procedures
5.1
Starting the maintenance task
5.1.1
Switching on the ID indicator
When working in a datacenter environment, switch on the ID indicator on the
front and rear of the system unit for easy identification.
I
For further information, refer to section
"Locating the defective system
unit" on page 45
.
Using the ID button on the Local Service Display
Ê
Press the ID button on the Local Service Display to switch on the ID
indicators.
I
For further information, refer to section
"Control elements on the
Local Service Display" on page 180
.
Using the ID button on the management blade
Ê
Press the ID button on the management blade to switch on the ID indicators
I
For further information, refer to section
"Control elements and
indicators on the management blade" on page 184
.
Using management blade web interface
Ê
In management blade web interface
press the
Locate
button in the status
frame to switch on the ID indicators.
Using ServerView Operations Manager
Ê
In ServerView Operations Manager choose
Single System View
and press the
Locate
button in the title bar to switch on the ID indicators.