BX900 S2
Upgrade and Maintenance Manual
83
Basic software procedures
5.2.12 Switching off the ID indicator
Press the ID button on the Local Service Display or on the management blade
or use the management blade web interface to switch off the ID indicator after
the maintenance task has been concluded successfully.
I
For further information, refer to section
"Locating the defective system
unit" on page 45
.
Using the ID button on the Local Service Display
Ê
Press the ID button on the Local Service Display to switch on the ID
indicators.
I
For further information, refer to section
"Control elements on the
Local Service Display" on page 180
.
Using the ID button on the management blade
Ê
Press the ID button on the management blade to switch on the ID indicators.
I
For further information, refer to section
"Control elements and
indicators on the management blade" on page 184
.
Using management blade web interface
Ê
In management blade web interface
press the
Locate
button in the status
frame to switch on the ID indicators.
Using ServerView Operations Manager
Ê
In ServerView Operations Manager choose
Single System View
and press the
Locate
button in the title bar to switch on the ID indicators.