10.9 System
StartTLS/LDAPS
Select one of the following:
l
Start TLS
- Select to encrypt the
connections to the LDAP/AD server.
This enables a secure connection over a
standard port. Do not enable Start TLS to
encrypt connections if the server URL uses
a secure protocol (LDAPS).
l
LDAPS
- Select if the server URL uses the
LDAPS secure protocol.
Port
l
Start TLS
- Default port is 389.
l
LDAPS
- Default port is 636.
Entering a port setting will disable the
default port settings.
Certificate URL
(Start TLS only) Enter the URL where the
Certificate Authority (CA)
certificate in PEM format can be downloaded
from.
When using an alternate domain server
too, you may have to provide both
certificates stored in one file.
Principal (bind) DN
Enter the domain name of the principal user.
The principal user is any user who is
authorized to add a system to the LDAP or AD
domain.
Example
-
uid=admin,ou=People,dc=mycompany,dc=com
Password
Enter the password for the simple
authentication.
Confirm Password
Re-enter the password for the simple
authentication.
3. Enter the
Search Strings
, which are building the base DN to restrict user searches to a
specific subtree:
User DN
Enter a distinguished name for retrieving user
information.
Example
- dc=mycompany,dc=com
ETERNUS CS800
322
Summary of Contents for ETERNUS CS800 S6
Page 1: ...English ETERNUS CS800 S6 User Guide V3 2 7 Edition April 2017 ...
Page 131: ...7 3 The Remote Management Console Figure 98 Remote Management Pages Map ETERNUS CS800 131 ...
Page 173: ...8 8 AIS Connect Figure 132 AISConnect Wizard Confirm ETERNUS CS800 173 ...
Page 449: ...16 2 Storage Subsystem Figure 313 Inserting the 3 5 inch HDD module ETERNUS CS800 449 ...