10.5 Replication Configuration
partition, replicated data is sent to the target system during scheduled or manual
replication.
Additional Information
l
Before you can add a replication target, you must add the ETERNUS CS800 to the list of
allowed replication sources on the target ETERNUS CS800 (see
).
l
To add a new target when two targets are already configured, first delete one target
(see
"Deleting a Replication Target" on page 257
). Then add the new target.
l
For more information about enabling and scheduling replication for a share or
partition, see
"Replication Send" on page 347
To add a replication target:
1. Under
Target System
, click
Add
.
The
Add Target Host
window displays (see
).
Figure 177: Add Target Host
2. In the
Target Hostname or IP
box, enter the hostname or IP address of the system
that will receive the replicated data.
When entering IP addresses, never use an address that is in a reserved IP address
range. To see a list of reserved IP address ranges, click the quick tip icon
[?]
located
near the IP address field.
To use hostname format, you must specify at least one DNS IP address on the
Network
page (see
).
3. In the
Encryption
drop-down box, select the type of encryption to use when sending
replication data to the target system (
None
,
128-bit
, or
256-bit
).
CAUTION!
For encryption, select
None
or
128-bit
if you are sending data to a ETERNUS
CS800 running a system software version prior to ETERNUS CS800 2.1.1 Software.
AES encryption options are available only if the Data-in-Flight license is
installed.
4. In the
Source IP
box, enter the IP address that is used to uniquely identify the source
ETERNUS CS800 to the target. This may be different than the actual network IP address
of the source ETERNUS CS800.
ETERNUS CS800
254
Summary of Contents for ETERNUS CS800 S6
Page 1: ...English ETERNUS CS800 S6 User Guide V3 2 7 Edition April 2017 ...
Page 131: ...7 3 The Remote Management Console Figure 98 Remote Management Pages Map ETERNUS CS800 131 ...
Page 173: ...8 8 AIS Connect Figure 132 AISConnect Wizard Confirm ETERNUS CS800 173 ...
Page 449: ...16 2 Storage Subsystem Figure 313 Inserting the 3 5 inch HDD module ETERNUS CS800 449 ...