Fujitsu ETERNUS CS800 S6 User Manual Download Page 144

Page: 144 / 561

8.3 VTL Wizard

Figure 107: VTL Wizard: Add Media

Step 4: Discover Remote Hosts

1. Click

Discover Remote Hosts

to list all hosts that are known to the ETERNUS CS800

(see

"VTL Wizard: Discover Remote Hosts" on page 145

A host is made known to the ETERNUS CS800 if you enter the host ID on this page, or if
the host logs on to one or more Fibre Channel target ports.

If you do not see the world wide name (WWN) of the host, make sure the host is
connected to a Fibre Channel port on the ETERNUS CS800 and click

Discover Remote

Hosts

again.

The

Backpanel Locations

section displays a graphical representation of the Fibre

Channel and Ethernet ports as they appear on the rear of the system.

Active

status indicates the host is currently logged on to one or more Fibre

Channel target ports.

2. Enter information about the host:

Remote Host WWPN

Enter the World Wide Port Name (WWPN) of the host.

Alias

Enter a descriptive alias for the host

3. Click

Apply

4. (Optional) To discover additional hosts, repeat Steps 1–3.

5. Click

Next

to continue.

ETERNUS CS800

144

Summary of Contents for ETERNUS CS800 S6


















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ETERNUS CS800 S6

Reviews:

Related manuals for ETERNUS CS800 S6

Brands by name

Popular brands

Fujitsu ETERNUS CS800 S6, User Manual

Search results

Summary of Contents for ETERNUS CS800 S6

Reviews:

Related manuals for ETERNUS CS800 S6

Brands by name

Popular brands