10.3 VTL Configuration
Targets
Use the
Targets
page to view the current target (Fibre Channel) configuration.
To access the
Targets
page, on the
Host Access
page, click the
Targets
tab (see
).
Figure 160: Targets Page
The
Targets
page displays the
Target Port
and
WWPN
for the currently configured targets.
The
Backpanel Locations
section displays a graphical representation of the Fibre Channel
and Ethernet ports as they appear on the rear of the system.
A mapped (green) status indicates the host is currently logged on to one or
more Fibre Channel target ports.
Select one or more targets and click
Reset Target(s)
to initiate a Fibre Channel reset on
the selected ports. A reset causes the ports to go through LIP (Loop Initialization
Protocol).
Target Usage
Use the
Target Usage
page to view current target and device mappings for the ETERNUS
CS800.
To access the
Target Usage
page, on the
Host Access
page, click the
Target Usage
tab (see
"Target Usage Page" on page 227
).
ETERNUS CS800
226
Summary of Contents for ETERNUS CS800 S6
Page 1: ...English ETERNUS CS800 S6 User Guide V3 2 7 Edition April 2017 ...
Page 131: ...7 3 The Remote Management Console Figure 98 Remote Management Pages Map ETERNUS CS800 131 ...
Page 173: ...8 8 AIS Connect Figure 132 AISConnect Wizard Confirm ETERNUS CS800 173 ...
Page 449: ...16 2 Storage Subsystem Figure 313 Inserting the 3 5 inch HDD module ETERNUS CS800 449 ...
