10.9 System
Figure 229: SSL Page
Tasks
Use the
SSL
page to perform the following tasks:
l
Enable or disable SSL on the ETERNUS CS800 (see
).
If you enable SSL, see
"Server Authentication Warnings" on page 325
for
important information about Web browser settings.
l
Install a new SSL certificate (see
"Installing an SSL Certificate" on page 326
).
Enabling SSL
SSL (Secure Sockets Layer) is a protocol that provides security and privacy over the
Internet by negotiating encryption keys before transmitting data between a client and a
server.
To establish a secure connection, the ETERNUS CS800 must have an encryption key
assigned to it by a Certification Authority in the form of a certificate file, private key file,
and pass phrase. After you install these components, you can establish a secure
connection using the SSL protocol. The ETERNUS CS800 comes with a Fujitsu Technology
Solutions default SSL certificate.
To enable or disable SSL:
1. Under
SSL Properties
, select the
Enable SSL
option to enable SSL.
Or select the
Disable SSL
option to disable SSL.
The default setting is disabled.
2. Click
Apply
.
Server Authentication Warnings
Enabling SSL with the default Fujitsu Technology Solutions certificate allows you to
securely communicate with the Fujitsu Technology Solutions Web-based interface using
SSL encryption. However, you may receive a warning from your Web browser and network
ETERNUS CS800
325
Summary of Contents for ETERNUS CS800 S6
Page 1: ...English ETERNUS CS800 S6 User Guide V3 2 7 Edition April 2017 ...
Page 131: ...7 3 The Remote Management Console Figure 98 Remote Management Pages Map ETERNUS CS800 131 ...
Page 173: ...8 8 AIS Connect Figure 132 AISConnect Wizard Confirm ETERNUS CS800 173 ...
Page 449: ...16 2 Storage Subsystem Figure 313 Inserting the 3 5 inch HDD module ETERNUS CS800 449 ...
