285
Using the Operator Panel Menus and Keypad
• Line Monitor
Purpose:
To set the volume of the line monitor, which audibly monitors a transmission through the internal
speaker until a connection is made.
Values:
• Ring Tone Volume
Purpose:
To set the volume of the ring tone, which indicates that an incoming call is a telephone call through the
internal speaker when
Ans Select
is set to
TEL/FAX Mode
.
Values:
• Line Type
Purpose:
To select the line type.
Values:
• Dialing Type
Purpose:
To select the dialing type.
Values:
NOTE:
•
This menu is not displayed when
Region
is set to
Australia
.
• Interval Timer
Purpose:
To specify the interval between transmission attempts within the range of 3 to 255 seconds. The
default is eight seconds.
Off
Turns off the volume of the line monitor.
Min
Sets the volume of the line monitor.
Middle*
Max
Off
Turns off the volume of the ring tone.
Min
Sets the volume of the ring tone.
Middle
Max*
PSTN*
Sets the line type to PSTN.
PBX
Sets the line type to PBX.
Tone*
Sets the dialing type to
Tone
.
DP (10PPS)
Sets the dialing type to Dial Pulse (10 pulse per second).
Summary of Contents for DocuPrint M105 ab
