Fuji Xerox DocuPrint M105 ab, User Manual

Page: 282 / 415

281 Using the Operator Panel Menus and Keypad
„ Admin Menu
Use
Admin Menu
to configure a variety of printer features.
NOTE:
• A password is required to enter the
Admin Menu
menu when
Panel Lock Set
is set to
Enable
. In this
case, enter the password you specified, and press the button.
Phone Book (DocuPrint M105 f Only)
Use the
Phone Book
menu to configure the speed dial and group dial settings.
• Speed Dial
Purpose:
To store up to 99 frequently dialed numbers in speed dial locations.
NOTE:
• The first eight entries are assigned to the one-touch buttons on the operator panel.
See also:
• "Storing a Number for Speed Dialing" on page 255
• Group Dial
Purpose:
To create a group of fax destinations and register it under a 2-digit dial code. Up to 6 group dial codes
can be registered.
See also:
• "Setting Group Dial" on page 258
Network (DocuPrint M105 f Only)
Use the
Network
menu to change the printer settings affecting jobs sent to the printer through the
network.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Ethernet
Purpose:
To specify the communication speed and the duplex settings of Ethernet. The change becomes
effective after the printer is turned off and then on.
Values:
Auto* Detects the Ethernet settings automatically.
10BASE-T Half Uses 10base-T half-duplex.
10BASE-T Full Uses 10base-T full-duplex.
100BASE-TX Half Uses 100base-TX half-duplex.
100BASE-TX Full Uses 100base-TX full-duplex.