Fuji Xerox DocuPrint M105 ab, User Manual

Page: 319 / 415

Using the Operator Panel Menus and Keypad 318
Resetting to Factory Defaults
After executing
Initialize NVM
and rebooting the printer, the menu parameters or data are reset to
their factory default values.
NOTE:
• The following procedure does not initialize the network settings.
– For the DocuPrint M105 f, to initialize the network settings, refer to "Initialize NVM" on page 283 .
1
Press the ( System ) button.
2
Select
Admin Menu
, and then press the button.
3
Select
Maintenance
, and then press the button.
4
Select
Initialize NVM
, and then press the button.
5
Select
System Section
to initialize the menu parameters, and then press the button.
For the DocuPrint M105 f, select
User Fax Section
to initialize the Address Book data for fax.
6
Select
Yes
, and then press the button.
The printer restarts automatically to apply the settings.