Fuji Xerox DocuPrint C3055 DX User Manual Download Page 97

Page: 97 / 238

5.2 Setting the Common Menus

[PostScript]

Sets the settings related to PostScript.

Note

• On the DocuPrint C3055, [PostScript] appears only when the PostScript software kit (optional) is

installed.

Print Language

PostScript

PS Error Report

PostScript

PS Job Time-out

PostScript

Init PS Disk

PostScript

PaperSelect Mode

PostScript

Output Color

Setting Item

Description

PS Error Report

Sets whether to print an error report in case of a PostScript error.
• [On] (default)
• [Off]

Note

• After changing this setting, reboot the printer.

PS Job Time-out

Sets the amount of time the printer waits for a print job. If a time-out occurs dur-
ing data reception, the printer stops the reception and starts printing the
received data.
Specify the time-out value in 1 minute increments.
• [Off] (default)

Disables the job time-out.

• [1 min.] to [900 min.]

Note

• After changing this setting, reboot the printer.

Init PS Disk

Initializes the Post Script information stored in the hard disk (optional).

Note

• [Init PS Disk] appears only when the hard disk (optional) is installed.

Paper Select Mode

Sets whether to enable the PostScript DMS (Deferred Media Selection) fea-
ture.
• [Auto] (default)

Enables the DMS feature.

• [Select From Tray]

Disables the DMS feature and selects a paper tray.

Note

• After changing this setting, reboot the printer.

Output Color

Sets the output color for PostScript.
• [Color] (default)
• [Black]

Note

• After changing this setting, reboot the printer.

Summary of Contents for DocuPrint C3055 DX














































































































































































































































Search results

Summary of Contents for DocuPrint C3055 DX

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint C3055 DX, User Manual

Search results

Summary of Contents for DocuPrint C3055 DX

Reviews:

Brands by name

Popular brands