manualshive.com logo in svg

Fuji Xerox DocuPrint C3055 DX, User Manual

Share
Download
Fuji Xerox DocuPrint C3055 DX User Manual Download Page 159

6.9 Non-genuine Mode

159

6.9

Non-genuine Mode

When the toner within a toner cartridge is empty, the [Replace X Toner Cartridge] (X: Black, 
Cyan, Magenta, or Yellow) message appears.
When you want to use the printer in Non-genuine mode, use the following procedure to 
program the mode and replace the toner cartridge.

Important

• If you use the printer in the Non-genuine mode, the performance of the printer may not be at its optimum. 

And any problems that may arise from the use of the Non-genuine mode are not covered by our quality 
guarantee. The continuous use of the Non-genuine mode can also cause the printer to break down, and 
any repair charges for such break down will be incurred by users.

Note

• To disable the Non-genuine mode, select [Off] in Step 4.

1.

Press the < > and <Eject/Set> buttons 
simultaneously on the control panel.
[Consumables Menu] is displayed.

2.

Press the < > button.
[Toner] is displayed.

3.

Press the < > button again.
The current setting is displayed.

4.

Press the < > button to display [On]. 
Then, press the <Eject/Set> button to 
confirm the selection. 

5.

Press the <Menu> button.
The printer switches to the Non-genuine 
mode.

Consumables Menu

Non-genuine

Non-genuine

Toner

Toner

Off*

Toner

On*

Ready to print

Non-genuine

Summary of Contents for DocuPrint C3055 DX















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands