Fuji Xerox DocuPrint C3055 DX User Manual Download Page 116

Page: 116 / 238

116

5 Control Panel Menus

[Auto Job History]

[2 Sided Report]

[Banner Sheet]

System Settings

AutoJob History

Setting Item

Description

Auto Job History

Sets whether to automatically print information about print jobs that have been
processed ([Job History Report]).
• [Off] (default)

Does not automatically print the [Job History Report].

• [On]

Automatically prints the [Job History Report] when the number of jobs
processed reaches 22.

System Settings

2 Sided Report

Setting Item

Description

2 Sided Report

Sets whether to print reports/lists 1-sided or 2-sided.
• [1 Sided] (default)
• [2 Sided]

Note

• On the DocuPrint C3055, [2 Sided Report] appears only when the duplex

unit (optional) is installed.

System Settings

Banner Sheet

Insert Position

Banner Sheet

Specify Tray

Setting Item

Description

Insert Position

Sets whether to insert banner sheets.
• [Off] (default)

Does not insert banner sheets.

• [Front]

Inserts a banner sheet at the beginning of a document.

• [Back]

Inserts a banner sheet at the end of a document.

• [Front & Back]

Inserts banner sheets at the beginning and end of a document.

Specify Tray

Sets the paper tray to be used for printing banner sheets.
• [Tray 1] to [Bypass Tray] (default: [Tray 1])

Note

• [Specify Tray] displays only the names of the trays installed on the printer.

Summary of Contents for DocuPrint C3055 DX














































































































































































































































Search results

Summary of Contents for DocuPrint C3055 DX

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint C3055 DX, User Manual

Search results

Summary of Contents for DocuPrint C3055 DX

Reviews:

Brands by name

Popular brands