manualshive.com logo in svg

Fuji Xerox DocuPrint C3055 DX, User Manual

Share
Download
Fuji Xerox DocuPrint C3055 DX User Manual Download Page 218

218

A Appendix

A.5

Connecting the Printer to a Scanner 
(Associated Product) 

Connecting the printer to a scanner (associated product) allows you to use copy features 
on the printer. This section describes the guidelines for connecting the printer to a scanner 
and installing them using a scanner stand (associated product).

Note

• The scanner and scanner stand are not available in some countries. Contact your dealers for details.

Installation

To use the scanner stand, you must either mount the optional cabinet or castor base to the 
printer.
The printer and the accessories can be installed in the following combinations.

The following is a brief explanation of how to assemble and mount each accessory to the 
printer. For more detailed instructions, refer to the “Setup Guide’ and the installation guide 
provided for each accessory.

1.

Assemble the scanner stand. Mount the adjuster to B as shown in the figure. 
(Refer to the installation guide provided for the scanner stand.)

2.

Place the cabinet or castor base on the floor at least 600 mm away from the printer. 
If the installation of the printer is already finished, skip this and go on to the next step.

castor base

Up to two sheet feeders can be added to the 
printer if using the castor base.

Sheet feeders cannot be added to the printer if 
using the cabinet.

cabinet

Summary of Contents for DocuPrint C3055 DX















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands