manualshive.com logo in svg

Fuji Xerox DocuPrint C3055 DX, User Manual

Share
Download
Fuji Xerox DocuPrint C3055 DX User Manual Download Page 209

7.12 Moving the Printer

209

7.12

Moving the Printer

Follow these steps when moving the printer.

CAUTION

• The machine (including the consumables) weighs 41.6 kg/42.6 kg (DocuPrint C3055/

DocuPrint C3055 DX). When moving the equipment, make sure that there are three or 
more persons carrying it.

• When lifting the machine, firmly grip the recessed areas on both sides of the machine 

with three or more persons. Lifting the machine by gripping any other areas can cause 
the machine to fall and result in injuries.

• When lifting the machine, get a firm footing and bend your knees to avoid possible 

injuries to your back.

Important

• If the optional sheet feeders are installed, remove them before moving the printer. If they are not 

securely installed, they may fall and cause injuries. For information on how to uninstall the sheet feeders, 
refer to the installation guide included with the sheet feeders.

1.

Remove the paper from the bypass tray, and close the bypass tray cover. Re-wrap the 
paper and store it away from dust and humidity.

Important

• When closing the bypass tray cover, be careful not to get your fingers caught between (the left or right 

edge of) the cover and the printer.

2.

Use the [Replace Toner] setting on the control panel to remove all toner cartridges 
from the printer.

Important

• Do not touch the interior of the printer. Some parts may be hot.
• Make sure to remove the toner cartridges before moving the printer. Otherwise, the toner may spill in the 

printer.

• Do not shake the toner cartridges after removing them. The toner may spill.

Note

• For information on how to remove the toner cartridges, refer to "Replacing the Toner Cartridges" (P. 

162).

3.

Switch the power off by pressing the power switch located on the left side of the 
printer to the <O> position.

4.

Unplug the power cord, interface cable, and all the other cables from the printer.

WARNING

• Never touch a power cord with wet hands. Danger of electric shock exists.

Summary of Contents for DocuPrint C3055 DX















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands