manualshive.com logo in svg

Fuji Xerox DocuPrint C3055 DX, User Manual

Share
Download
Fuji Xerox DocuPrint C3055 DX User Manual Download Page 171

7.2 Printing Reports/Lists

171

Printing a Report/List

The reports/lists can be printed using the control panel. The following shows how to print 
the Printer Settings list. The procedure is the same also for other reports/lists.

Note

• The reports/lists are printed on A4 size paper.

1.

Press the <Menu> button to display the 
Menu screen

2.

Press the < > button until [Report/List] is 
displayed.

3.

Press the < > button to accept the 
selection.
[Job History] is displayed.

4.

Press the < > button until [Printer 
Settings] is displayed.

5.

Press the <Eject/Set> button to print the 
report.
The report is printed.

Menu

Print Language

Menu

Report/List

Report/List

Job History

Report/List

Printer Settings

Summary of Contents for DocuPrint C3055 DX















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands