Fuji Xerox DocuColor 5065II User Manual Download Page 371

Page: 371 / 416

Paper Jams

369

rob
le

m Solving

Paper Jams at the Booklet Tray (for the C-Finisher with Booklet Maker)

If the finisher is installed, follow the
steps below. If no finisher is
installed, go to Step 2.

1) Make sure that the machine is

turn off, and then open the
front cover of the finisher.

2) Pull the lever 1a rightward.

Turn the wheel 4a to the right to
eject the jammed paper onto the
booklet tray.

Remove the jammed paper.

Note

•

If paper is torn, check for any
torn pieces of paper inside the
machin.

Close the front cover of the finisher.

Note

•

A message will be displayed and the machine will not operate if the front cover of the finisher
is even slightly open.

Summary of Contents for DocuColor 5065II
































































































































































































































































































































































































































Search results

Summary of Contents for DocuColor 5065II

Reviews:

Related manuals for DocuColor 5065II

Brands by name

Popular brands

Fuji Xerox DocuColor 5065II, User Manual

Search results

Summary of Contents for DocuColor 5065II

Reviews:

Related manuals for DocuColor 5065II

Brands by name

Popular brands