Fuji Xerox DocuColor 5065II User Manual Download Page 22

Page: 22 / 416

1 Before Using the Machine

Before Us

g the Ma

chin

Keep electrical and mechanical safety interlocks active. Keep the safety

interlocks away from magnetic materials. Magnetic materials may accidentally

activate the product and cause injuries or electric shock.
A circuit breaker is embedded in this product. If current leakage occurs, the

circuit breaker automatically cuts off power circuit to prevent electric shock and

a fire accident. The circuit breaker is normally ON ("|"). Check once a month if

the circuit breaker works properly in accordance with the following procedures:

1) Press the TEST button. The breaker switch is turned Off ("O"). (This

means that the breaker is OK.)

2) Return the breaker switch to On ("|").

If the circuit does not work properly, contact your local Fuji Xerox

representative.

Do not attempt to remove a paper jammed deeply inside the product,

particularly a paper wrapped around a fuser or a heat roller. Otherwise, it may

cause injuries or burns. Switch off the product promptly and contact your local

Fuji Xerox representative.
Never touch the paper output area of the finisher during operation. It may

cause injuries.

Be careful in removing jammed staples.

Be careful not to get injured by waste staples when detaching a staple dust

box.

Waste staples may come out with output paper. Be careful not to get injured

by the staples.

Never touch safety interlocks. When a front cover is open, safety interlocks

become activated to stop the machinery. Do not apply pressure on safety

interlocks with a coin or screwdriver. Otherwise, the machinery may become

activated and cause injuries.

TEST button

Breaker switch

TEST button

Breaker switch

Summary of Contents for DocuColor 5065II
































































































































































































































































































































































































































Search results

Summary of Contents for DocuColor 5065II

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuColor 5065II, User Manual

Search results

Summary of Contents for DocuColor 5065II

Reviews:

Brands by name

Popular brands