manualshive.com logo in svg

Fuji Xerox DocuColor 5065II, User Manual

Share
Download
Fuji Xerox DocuColor 5065II User Manual Download Page 330

13 Problem Solving

328

P

rob
le

m Solving

13

The entire page 
is printed faint.

When the print was made 
using the Tray 5 (bypass), 
the size and type of the 
actually loaded paper 
differed from the setting on 
the print driver.

Load paper of the correct size and type into 
the Tray 5 (bypass).

Refer to "Loading Paper in the Tray 5 
(Bypass)" (P.166).

Two or more sheets may be 
feeding at once.

Fan the paper well and load it again.

Refer to "Loading Paper" (P.162).

Paper becomes 
wrinkled.
Text is blurred.

The paper in use is 
unsuitable.

Replace with paper from a new ream.

Refer to "Loading Paper" (P.162).

Paper is being added while 
it is being fed.

The paper is damp.

White areas 
appear or color is 
missing vertically

The drum cartridge is 
depleted or damaged.

Replace with a new drum cartridge.

Refer to "Replacing Drum Cartridge R1 (for 
customers having a spot maintenance contract)" 
(P.291), or "Replacing Drum Cartridge R2/R3/
R4 (for customers having a spot maintenance 
contract)" (P.294).

There is no toner left in the 
toner cartridge.

Replace with a new toner cartridge.

Refer to "Replacing Toner Cartridges" (P.287).

Text or images 
are printed at an 
angle

The paper guide in the 
paper tray is not set at the 
correct position.

Set the horizontal and vertical paper 
guides to the correct positions.

Refer to "Loading Paper" (P.162).

Symptoms

Check

Remedy

Summary of Contents for DocuColor 5065II

































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands