Fuji Xerox DocuColor 5065II User Manual Download Page 270

Page: 270 / 416

10 Machine Status

268

Mach

e S
ta

Overview of Machine Status

You can check the machine status and number of printed pages in the screen. You can

also print a report/list to check the job history and set/recorded values.

Press the <Machine Status>
button.

In the [Machine Status] screen, you can do the following.

Machine Status Check

You can check the machine configuration, paper tray status, and hard disk overwriting

status. You can also change and register settings of the print mode.

For more information, refer to "Machine Status" (P.269).

Meter Check and Report Output

You can check the number of pages printed for each meter or for each user. You can

also print a report/list to check the job history and set/recorded values.

For more information, refer to "Billing Meter/Print Report" (P.272).

Consumable Check

You can check the status of supplies.

For more information, refer to "Supplies" (P.278).

Fault Check

You can check the faults that have occurred in the machine.

For more information, refer to "Faults" (P.279).

<Machine
Status> button

Summary of Contents for DocuColor 5065II
































































































































































































































































































































































































































Search results

Summary of Contents for DocuColor 5065II

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuColor 5065II, User Manual

Search results

Summary of Contents for DocuColor 5065II

Reviews:

Brands by name

Popular brands