Fuji Electric Monitouch S8 series, Connection Manual

Page: 109 / 406

7-24 7. Fuji Electric
7.2.6 F-MPC04P (Loader)
Communication Setting
Editor
Communication setting
(Underlined setting: default)
*1 To use port No. 32 to 99, use the station number table.
Power Monitor Unit
Be sure to match the settings to those made on the [Communication Setting] tab window of the editor. (Underlined setting:
default)
Station number setting
Communication setting
The communication parameter can be set using keys attached to the front of the power monitor unit.
Available Memory
The available memory setting range varies depending on the device. Be sure to set within the range available with the device
to be used. Use [TYPE] when assigning the indirect memory for macro programs.
Item Setting Remarks
Connection Mode 1 : 1 / 1 : n / Multi-link2
Signal Level RS-422/485
Baud Rate 4800 / 9600 / 19200 bps
Data Length 7 / 8 bits
Stop Bit 1 bit
Do not change the default setting
because the setting on the power
monitor unit cannot be changed.
Parity None / Odd / Even
Target Port No.
1 to 99
*1
Station Setting Example Remarks
01 to 99 [DEC] (default: 0) 1
Circuit No. Setting Code Item Setting Example
C
L1-
Baud rate
00: 4800 bps
01: 9600 bps
02: 19200 bps
02
L2-
Parity
00: None
01: Even
02: Odd
02
L3-
Data length
00: 7 bits
01: 8 bits
00
ADDRESS SW
˜
0
1
2
3
4
5
6
7
8
9
˜
0
1
2
3
4
5
6
7
8
9
Memory TYPE Remarks
--- 00H Double-word