Fuji Electric Monitouch S8 series, Connection Manual

Page: 117 / 406

7-32 7. Fuji Electric
20zz Phase selection (Blank)
Protective OCG (50G) (current setting)
*2
21zz Power alarm upper limit Power alarm upper limit
Protective OCG (50G) (operation time)
*2
22zz
Integral power pulse multiplying factor
*4
Pulse multiplying factor
*4
Protective OCG (50G) (output setting)
23zz Load pre-alarm operation value
Load pre-alarm
operation value
Protective DG (DG/OCG) (current setting)
*3
24zz Load pre-alarm operation time (Blank)
Protective DG (DG/OCG) (operation time)
*3
25zz Leak pre-alarm sensitivity current
Leak pre-alarm
sensitivity current
Protect DG (DG/OCG) (output setting)
26zz
Leak pre-alarm operation time
*2
Leak pre-alarm
operation time
*2
Protective DG (DG/OCG) (maximum
sensitivity phase angle)
27zz OCG sensitivity current
Leak alarm sensitivity
current
Protective DG (DG/OCG) (voltage setting)
*2
28zz
OCG operation time
*2
Leak alarm operation
time
*2
Protective DG (DG/OCG) (selected from DG
or OCG)
29zz Operation type for power
Operation type for
power
Protective 0 V (voltage setting)
30zz (Blank) Phase R input position
Protective 0 V (operation time)
*2
31zz (Blank)
History of turning
breaker ON
Protective 0 V (output setting)
32zz (Blank)
Show/hide cause of
trouble
Protective UV (voltage setting)
33zz (Blank)
Phase interruption
alarm of neutral line
Protective UV (operation time)
*2
34zz (Blank) Alarm output 1 Protective UV (output setting)
35zz (Blank) Alarm output 2 Protective UV2 (voltage setting)
36zz (Blank) Contact input 1
Protective UV2 (operation time)
*2
37zz (Blank) Contact input 2 Protective UV2 (output setting)
38zz (Blank) (Blank) Protective UV operation setting
39zz (Blank) Rated current (IN) Voltage establishment VR (voltage setting)
40zz (Blank) Current demand time
Voltage establishment VR (operation time)
*2
41zz (Blank) Voltage demand time Voltage establishment VR (output setting)
42zz (Blank) Power demand time
Protective OVG (voltage setting)
*2
43zz (Blank) Leak demand time Protective OVG (operation time)
44zz (Blank) (Blank) Protective OVG (output setting)
45zz (Blank) (Blank) ZPD/EVT selection
46zz (Blank) (Blank) Phase interruption relay
47zz (Blank) (Blank) Reverse phase relay
48zz (Blank) (Blank) Demand average time
49zz (Blank) Year setting
CB opening jam monitoring time
*3
50zz (Blank) Month setting
CB closing jam monitoring time
*3
51zz (Blank) Date setting
Monitoring trip coil TC disconnection, OFF
expedited, function application setting
52zz (Blank) Hour setting
kWh pulse constant
*5
53zz (Blank) Minute setting
kvarh pulse constant
*5
54zz (Blank) (Blank) Selective input 1 function setting
Address F-MPC04/F-MPC04P/F-MPC04S FePSU F-MPC30/F-MPC50/F-MPC55V/F-MPC60B