Fuji Electric Monitouch S8 series, Connection Manual

Page: 120 / 406

7.2 Temperature Controller/Servo/Inverter Connection 7-35
7.2.8 FVR-E11S (MODBUS RTU)
Communication Setting
Editor
Communication setting
(Underlined setting: default)
Inverter
Be sure to match the communication settings of the inverter to those made on the editor.
For details on communication parameters of the inverter, contact your local distributor.
Available Memory
The available memory setting range varies depending on the device. Be sure to set within the range available with the device
to be used. Use [TYPE] when assigning the indirect memory for macro programs.
Item Setting Remarks
Connection Mode 1 : 1 / 1 : n / Multi-link2
Signal Level RS-232C / RS-422/485
Baud Rate 4800 / 9600 / 19200 bps
Data Length 8 bits
Stop Bit 1 / 2 bits
Parity None / Odd / Even
Target Port No. 1 to 31
Memory TYPE Remarks
4 02H