Fuji Electric Monitouch S8 series, Connection Manual

Page: 228 / 406

12.1 PLC Connection 12-3
12.1.1 SYSMAC C
Communication Setting
Editor
Communication setting
(Underlined setting: default)
Transmission mode 2
When the transmission mode 2 (BCD with signs) is selected, data in the PLC memory can be displayed on MONITOUCH as
data with signs.
When higher 4 bits in the memory indicates [F] or [A], it is treated as negative.
[F]:
Regards higher 4 bits as [
−
0].
[A]: Regards higher 4 bits as [
−
1].
•
Displayable range 1 word:
−
1999 to +9999
2 words:
−
19999999 to +99999999
Example:
•
Setting procedure: Num. Display [Input Type: BCD]
[Display Type: DEC] (w/ sign
−
, w/ sign +
−
)
Item Setting Remarks
Connection Mode 1 : 1 / 1 : n / Multi-link / Multi-link2
Signal Level RS-232C / RS-422/485
Baud Rate 4800 / 9600 / 19200 bps
Data Length 7 / 8 bits
Stop Bit 1 / 2 bits
Parity None / Odd / Even
Target Port No. 0 to 31
Transmission Mode
Transmission Mode 1 /
Transmission Mode 2
Transmission Mode 1: BCD without signs
Transmission Mode 2: BCD with signs
PLC Memory Indication on the S8 Series
0000 to 9999 0 to 9999
F001 to F999
−
1 to
−
999
A000 to A999
−
1000 to
−
1999
00000000 to 99999999 0 to 99999999
F0000001 to F9999999
−
1 to
−
9999999
A0000000 to A9999999
−
10000000 to
−
19999999