Fuji Electric Monitouch S8 series, Connection Manual

Page: 110 / 406

7.2 Temperature Controller/Servo/Inverter Connection 7-25
Station Number Table
•
A maximum of 31 units can be connected via serial communication. Port numbers from 0 to 31 can be set on the
[Memory Setting] dialog of the editor; however, depending on the controller, port numbers exceeding 32 may be
available. In such a case, use the station number table to enable communications with devices of port No. 32 or greater.
•
It is easier to specify port numbers for each network in the field by making the screen for setting the port number when
creating screen data. In this case, it is not necessary to transfer screen data again.
Setting the Station Number Table
1. Click [System Setting]
→
[Device Connection Setting]. On the [Communication Setting] tab window, check [ Use Port
No. Table].
2. Click the [Port No. Table] button. The [Port No. Table Setting] dialog is displayed.
3. Specify port numbers of the temperature controllers for “Table 0” to “31”.