NEC Display Solutions of America, Inc.
X551UHD Installation Guide
55” LCD Display
Rev 1.0
www.necdisplay.com
X551UHD
Page 1 of 9
Contents:
Product Description and Notes
Page 1
Tilt
Angle
and
Rotation
Page 1
Ventilation Recommendations
Page 2
Display Dimensions
Front, Top, Right Side, Left Side
Page 3
Rear & Bottom
Page 4
Display
Dimensions
with
stand
Page 5
Optional
Stand
dimensions
Page 5
Optional Speaker Dimensions (SP-TF1)
Page 6
Optional Speaker Dimensions (SP-RM1)
Page 7
Input
Panel
Page 8
Control Codes
Page 8
Cable
Connection
Page 9
Browser
Control
Page 9
Product Description:
Type:
LCD Display
Resolution:
3840 x 2160
Dimensions without stand: 49.2” (W) x 28.4” (L) x 3.1” (D)
Aspect
Ratio:
16:9
Dimensions
with stand:
49.2”(W) x 29.9”(H) x 15.7”(D)
FCC:
Class B
Weight without stand:
63.3 lbs
Power Consumption:
190W (max with no speaker/OPS slot)
Weight with stand:
68.1 lbs
BTU’s:
1706.07
BTU/hour
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation:
Below is the maximum angle the monitor can be tilted. Note that the monitor can only be tilted in the landscape position.
Face Up/Face Down
Brightness Setting must not exceed 70
