Fuji Electric Monitouch S8 series, Connection Manual

Page: 258 / 406

14.1 Temperature Controller/Servo/Inverter Connection 14-3
14.1.2 SRV (MODBUS RTU)
Communication Setting
Editor
Communication setting
(Underlined setting: default)
SRV
Address setting switch
DIP switch setting
* Communication time settings (send changeover time/data interval delay time) can be made using the switches 4, 5, and 6. For more
information, refer to the communication instruction manual for SRV.
Available Memory
The available memory setting range varies depending on the controller model. Be sure to set within the range available for
the controller. Use [TYPE] when assigning the indirect memory for macro programs.
Item Setting Remarks
Connection Mode 1 : 1 / 1 : n / Multi-link2
Signal Level RS-232C / RS-422/485
Baud Rate 9600 / 19200 / 38400 bps
Data Length 8 bits
Stop Bit 1 bit
Parity None / Odd / Even
Target Port No. 1 to 31
Switch Setting Remarks
00 to 30
Higher-order digit setting (
×
10)
Lower-order digit setting (
×
1)
The number that is one greater than the set value
is the address.
Switch Setting Contents Remarks
1 ON
Baud rate: 38400 bps
ON, OFF: 9600 bps
OFF, ON: 19200 bps
2 ON
3 ON
Data bit configuration
8 bits / 1 bit / without parity ON, OFF, ON: 8 bits / 1 bit / even
ON, ON, ON: 8 bits / 1 bit / odd
4 OFF
5 OFF
6 ON Protocol: Modbus
7 OFF -
8 OFF -
6
4
5
7 8
3 2
9
1
0
6
4
5
7 8
3 2
9
1
0
Memory TYPE Remarks
--- 00H