Fuji Electric Monitouch S8 series, Connection Manual

Page: 42 / 406

1.5 Settings for the Connected Device 1-23
GD-80 Compatible
Calendar memory
Follow the steps below to set the calendar memory.
1. Specify the desired memory address for [Calendar memory]. Six words are occupied consecutively.
2. Save calendar data in the calendar memory addresses specified in step 1 in BCD notation.
The allocation of calendar memory is shown below.
The day of the week is automatically recognized from the above data. It is not necessary to input any data.
3. Set bit 11 (calendar setting) of read area “n”. At the leading edge of this bit (0
→
1), data in calendar memory is set for
calendar data.
*1 Calendar data is cleared when the power is turned off. When the power is turned on, set calendar data according to the
procedure mentioned above.
*2 When using the calendar memory, automatic reading of calendar data at the time of PLC connection as well as
once-a-day automatic correction is not performed. Consequently, some errors may be introduced. Perform the
procedure described above at regular intervals.
1.5.3 Others
Printer
Select when you connect PictBridge printer to the USB-B port of S8 series.
For more information, refer to the separate S8 Series Reference manual.
GD-80 Compatible
Read/Write Area
When converting screen data files created on the MONITOUCH GD-80/81S series into those of the S8
series, this option is automatically checked.
• Unchecked:
The memory addresses allocated to the S8 series are applied to the read and write areas. (See page
1-16.)
• Checked:
The memory addresses allocated to the GD-80/81S series are applied to the read and write areas.
For more information on [Read Area] and [Write Area] of the GD-80/81S series, refer to the GD-80
User’s Manual provided separately.
Calendar memory
Use this memory area when the connected device is not equipped with the calendar function and the S8
series built-in clock * is not used.
Memory Contents
n Year (BCD 0 to 99)
n + 1 Month (BCD 1 to 12)
n + 2 Day (BCD 1 to 31)
n + 3 Hour (BCD 0 to 23)
n + 4 Minute(s) (BCD 0 to 59)
n + 5 Second(s) (BCD 0 to 59)