Fuji Electric Monitouch S8 series, Connection Manual

Page: 114 / 406

7.2 Temperature Controller/Servo/Inverter Connection 7-29
F-MPC04S
Communication setting
The communication parameters can be set using keys attached to the front of the power monitor unit.
Be sure to match the settings to those made on the [Communication Setting] tab window of the editor. (Underlined setting:
default)
*1 The communication function of F-MPC04 can be selected at the time of purchase. Select a model on which “F-MPC04 mode” is
available.
F-MPC30
Communication setting
The communication parameters can be set using keys attached to the front of the power monitor unit.
Be sure to match the settings to those made on the [Communication Setting] tab window of the editor. (Underlined setting:
default)
Setting Code Item Setting Example
L-
Baud rate
4.8: 4800 bps
9.6: 9600 bps
19.2: 19200 bps
19.2
L2-
Data length and
parity
8n: Data length 8 bits, without parity
8E: Data length 8 bits, even parity
8o: Data length 8 bits, odd parity
7n: Data length 7 bits, without parity
7E: Data length 7 bits, even parity
7o: Data length 7 bits, odd parity
7o
LA-
Address
(Transmission
station number)
Loc: Station number not set
01 to 99
01
Lt-
Communication
model mode
04: F-MPC04 mode
*1
PP: PPM (B) mode
04
Setting Code Item Setting Example
90
RS-485 address
setting Loc: Communication not used
01 to 99
01
91
RS-485
transmission
specification
7SEG LED
1927o
Data length
7: 7 bits
8: 8 bits
Baud rate
48: 4800 bps
96: 9600 bps
192: 19200 bps
Parity
n: None
E: Even
o: Odd
* “b192E” is set as default.