Fuji Electric Monitouch S8 series, Connection Manual

Page: 135 / 406

7-50 7. Fuji Electric
7.2.17 HFR-C11K
Communication Setting
Editor
Communication setting
(Underlined setting: default)
IH Inverter
Be sure to match the settings to those made on the [Communication Setting] tab window of the editor. (Underlined setting:
default)
SW3 setting (Station address / Terminating resistance)
*1 For communication with S8, be sure to set the station address other than 0.
Communication setting
Set communication parameters.
Be sure to match the settings to those made on the [Communication Setting] tab window of the editor. (Underlined setting:
default)
Item Setting Remarks
Connection Mode 1 : 1 / 1 : n / Multi-link2
Signal Level RS-232C / RS-422/485
Baud Rate 4800 / 9600 / 19200 bps
Data Length 7 / 8 bits
Stop Bit 1 / 2 bits
Parity None / Odd / Even
Target Port No. 1 to 31
Switch Contents
Example
Station Address: 1
Terminating Resistance: none
1
Station
Address*1
2
3
4
5
6
Terminating
Resistance
Function
Code
Item Setting Example
r 04 Baud rate
2: 4800 bps
3: 9600 bps
4: 19200 bps
3
r 05 Data length
0: 8 bit
1: 7 bits
1
r 06 Parity bit
0: None
1: Even
2: Odd
1
r 07 Stop bit
0: 2 bit
1: 1 bits
1
r 10
Communication
protocol
*
0: FGI-bus
1: C9K mode
0
1 2 3 4 5
0 OFF OFF OFF OFF OFF
1 ON OFF OFF OFF OFF
2 OFF ON OFF OFF OFF
3 ON ON OFF OFF OFF
: : : : : :
28 OFF OFF ON ON ON
29 ON OFF ON ON ON
30 OFF ON ON ON ON
31 ON ON ON ON ON
Address
Switch
ON
OFF
124
8
1
6
ON
12
345
6 T
e
rminating
Resistance
Contents OFF ON
Terminating resistance None Provided