Fuji Electric Monitouch S8 series, Connection Manual

Page: 60 / 406

3.1 PLC Connection 3-3
PORT2
Set parameters into the special register “R774, 775”, then set “A5AA” (HEX) into the setting complete register “R767”. When
the set value at R767 is changed to “AAAA” (HEX), it is regarded as normal; if it is changed to “AEAA” (HEX), it is regarded
as erroneous.
Parameter setting register
PORT3
Set parameters into the special register “R776, 777”, then set “5AAA” (HEX) into the setting complete register “R767”. When
the set value at R767 is changed to “AAAA” (HEX), it is regarded as normal; if it is changed to “EAAA” (HEX), it is regarded
as erroneous.
Parameter setting register
R773
8701H
38400 bps
Odd parity
Stop bit 1
Station number 01
Register Setting Setting Example
R774 Same as the setting register R772 for PORT1 00E0H
R775 Same as the setting register R773 for PORT1 8701H
Register Setting Setting Example
R776 Same as the setting register R772 for PORT1 00E0H
R777 Same as the setting register R773 for PORT1 8701H
Register Setting Setting Example
8 7 0 1
Station number
01 to 1F (HEX)
Baud rate
4: 4800 bps
5: 9600 bps
6: 19200 bps
7: 38400 bps
Parity stop bit
0: Without parity, stop bit 1
2: Without parity, stop bit 2
8: Odd parity, stop bit 1
A: Odd parity, stop bit 2
C: Even parity, stop bit 1
E: Even parity, stop bit 2