Fuji Electric Monitouch S8 series, Connection Manual

Page: 261 / 406

14-6 14. RKC
14.1.5 MA900 / MA901 (MODBUS RTU)
Communication Setting
Editor
Communication setting
(Underlined setting: default)
MA900/MA901
Setup setting mode
When the [R/S] key is pressed while the [SET] key is held down in the PV/SV monitor mode, the controller enters in the
“setup setting” mode.
(Underlined setting: default)
Available Memory
The available memory setting range varies depending on the controller model. Be sure to set within the range available for
the controller. Use [TYPE] when assigning the indirect memory for macro programs.
Item Setting Remarks
Connection Mode 1 : 1 / 1 : n / Multi-link2
Signal Level RS-232C / RS-422/485
Baud Rate 4800 / 9600 / 19200 bps
Data Length 8 bits
Stop Bit 1 bit
Parity None / Odd / Even
Target Port No. 1 to 31
Indication Item Setting Remarks
Add Slave address 1 to 31 Communication is not performed when “0” is set.
bPS Baud rate
1: 4800 bps
2: 9600 bps
3: 19200 bps
bIT Data configuration
0: 8 bits / 1 bit / none
2: 8 bits / 1 bit / even
4: 8 bits / 1 bit / odd
InT Interval time setting 0 to 250 Interval time = set value
×
1.666 ms
Memory TYPE Remarks
--- 00H